| SMITH CR-5/8-A-XC Cam Follower and Track Roller - Stud Type | J:159 mm; Z:74.6 mm; H:110 mm; L1:65 mm; N1:25 mm; Recommended tightening torque for set screw:22 Nm; s1:25.8 mm; T max.:100 °C; Dz:100 mm; T min.:-20 °C; |
| SMITH CR-2-XBC-SS Cam Follower and Track Roller - Stud Type | Precision class:P0; d:30 mm; C0r:34.5 kN; Max operating temperature, Tmax:120 °C; Track load capacity cylindrical outer ring:22.2 kN; Min operating temperature, Tmin:-20 °C; Bearing with/without cage:Avec; Brand:NTN; Cr:21.4 kN; F:35 mm; |
| SMITH CR-1-1/2-XBEC Cam Follower and Track Roller - Stud Type | DA_:18; B_:28; C:167; C0:199; db min:94; C_conv:167000; TSR rpm:4800; ALPHA_:0; SDM_:118.5; mass:1.9; |
| SMITH CR-1-1/8-XBEC Cam Follower and Track Roller - Stud Type | A1:19 mm; Designation of bearing:EX203G2; S:17 mm; B:34 mm; H:33.3 mm; J:50.8 mm; d:17 mm; B1:43.5 mm; N:M8; E:10 mm; |
| SMITH CR-3-XBE Cam Follower and Track Roller - Stud Type | Surface Treatment:No; Unit Body Material:Cast Iron; Stroke:No; d:20; Pillow Type, Category:Standard; Fit:J7; Diameter series symbol:For Heavy Load; Seal:Silicone; Unit, Type:Insert Bearing Unit; |
| SMITH HR-1-1/4-X Cam Follower and Track Roller - Stud Type | Bearing Part Number:6208; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):40; Flange O.D. H(φ):134; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Black Oxide Coating; |
| SMITH YR-4-C Cam Follower and Track Roller - Yoke Type | Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):10; Shape:Flange Type; Number of Bearings:Double; Seals:DD (Contact Rubber S; Bearing Retained:No; Flange Shape:Round Type; |
| SMITH NUKR-62 Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Surface Treatment:No; Days to Ship:Quote; RoHS:6; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; Stroke:No; |
| SMITH MYRV-50-SC Cam Follower and Track Roller - Yoke Type | T min.:-20 °C; L:220 mm; T max.:100 °C; d1:119 mm; Recommended tightening torque for set screw:27.1 Nm; C0:63.8 kN; B1:73.2 mm; Designation of bearing:EX217-52G2L3; B:53.2 mm; e:36 mm; |
| SMITH MYR-8-S Cam Follower and Track Roller - Yoke Type | SBRG:3; Z_:8; SDM_:22.5; m0:0.276; ALPHA_:40; yobi:7300BWDT; ALP22:0; Prod_Type3:ACBB_SR_MM_DT; D_:35; SRIX:0.04; |
| SMITH MCR-26-SC Cam Follower and Track Roller - Stud Type | L:94 mm; C:12.8 kN; P:150 mm; d:17 mm; L3:51 mm; T min.:-20 °C; C0:6.65 kN; L1:61 mm; N1:16 mm; d1:32.4 mm; |
| SMITH CR-1/2-A-XBC Cam Follower and Track Roller - Stud Type | d:50 mm; Adapter sleeve reference:HLK2310; T max.:100 °C; A1:14 mm; Designation of open end cover:SCO210-50; A:40 mm; d1:70 mm; Z:59.8 mm; G:M6x1; H3:110; |
| SMITH MCR-90 Cam Follower and Track Roller - Stud Type | Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):25; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Mount Type:Key Groove Type; Bearing Part Number:6005; RoHS:6; Type:Bearings with Housin; |
| SMITH MYR-45-S Cam Follower and Track Roller - Yoke Type | Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:4.12 Hz; D:47 mm; Radial clearance class:CN; Characteristic rolling element frequency, BSF:5.49 Hz; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Brand:NTN; Dynamic load, C:10.1 kN; d:25 mm; |
| SMITH CR-5/8 Cam Follower and Track Roller - Stud Type | Thread Nominal M(mm):M60×2.0; Volume Discount:Available; Surface Treatment:Surface Treatment Pr; Shape:Round Shape; Type:Lock Nuts; RoHS:6; Material:4140 Alloy Steel; Screw Type:Metric (Fine) Thread; |
| SMITH MCR-35-SBC Cam Follower and Track Roller - Stud Type | Bearing I.D. d(mm):25; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Thickness T(mm):34 ～ 59; RoHS:6; Seals:VV (Non-Contact Rubb; Number of Bearings:Double; Height H(mm):40 ～ 80; |