| 7017A5TRSUMP3 NSK Super Precision Bearings | ra (max):2.5 mm; d:105 mm; Configuration:Single Row; dc (min):137 mm; B:49 mm; ra1 (max):2.5 mm; Da (max):211 mm; r1:3 mm; Dynamic Load Rating:340,000 N; db (max):132 mm; db (min):119 mm; Enclosure:Open; Radial Clearance:0.085 to 0.125 mm; Fillet Radius/Chamfer:3 mm; Static Load Rating:385,000 N; D:225 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:2,600 rpm; Limiting Speed - Oil:3,200 rpm; |
| 7018A5TRQUMP3 NSK Super Precision Bearings | Limiting Speed (Oil):83800 rpm; Contact Angle:15 º; Limiting Speed (Grease):41900 rpm; Bearing Width:12 mm; da - Inner Ring Backing Diameter:21.500 mm; Ce - Dynamic Radial Rating1:12000 N; C0 - Static Radial Rating:5900 N; Ball Type:STEEL; D:40 mm; Cage Type:CR - Phenolic Outer; d:17 mm; Bearing Weight:0.064 Kg; Da - Outer Ring Backing Diameter:35.700 mm; R - Inner Ring To Clear Radius2:0.6 mm; r - Outer Ring To Clear Radius3:0.6 mm; |
| 7218A5TRDUDLP3 NSK Super Precision Bearings | Snap Ring Width:1.1 mm; Radial Clearance:0.013 to 0.028 mm; Bore Type:Cylindrical Bore; Cy (max):3.3 mm; Da (max):41 mm; Dynamic Load Rating:12,800 N; Static Load Rating:6,600 N; B:14 mm; Limiting Speed - Oil:18,000 rpm; Snap Ring Outside Diameter:52.7 mm; Limiting Speed - Grease:16,000 rpm; Fillet Radius/Chamfer:1 mm; d:20 mm; Dx (min):53.5 mm; da (min):26 mm; r1:0.5 mm; Enclosure:Snap Ring Groove wit; |
| 7016A5TRSULP3 NSK Super Precision Bearings | C90 - Dynamic Radial Rating (90 million revolutions)5:9000 lbf; Series:495; G1 - Heat Generation Factor (Roller-Raceway):104.6; Design Units:Imperial; da - Cone Frontface Backing Diameter:3.54 in; Cg - Geometry Factor:0.125; db - Cone Backface Backing Diameter:3.78 in; B - Cone Width:1.1720 in; C0 - Static Radial Rating:48600 lbf; Ab - Cage-Cone Frontface Clearance:0.12 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:60500 lbf; |
| 7020CTRDUDLP3 NSK Super Precision Bearings | Dimension J (Bolt Size):1.125 in; Y1 - Geometry Factor:2.62; Dimension D:6.63 in; C0 - Static Load:212000 lb; Oil Lubrication - T Seal:1500 rpm; Dimension E:7.000 in; Oil Lubrication - M/N Seal:700 rpm; Locking Style:Eccentric; Pre Install Clearance Max:0.145 mm; Full Timken Part Number:99999B; Dimension N:5.450 in; Grease Lubrication - M/N Seal:700 rpm; Shaft Size Type:Imperial; Bearing Number:22226; |
| 7016CTRSUMP3 NSK Super Precision Bearings | Configuration:Double Row; Nr. of Holes:4; Axial Load Factor Y2:2.77; Radial Clearance:0.055 to 0.075 mm; D:130 mm; Constant e:0.36; Retainer Material:Pressed Steel; Axial Load Factor Y1:1.86; Limiting Speed - Oil:4,700 rpm; Groove Width A:8 mm; Axial Load Factor Y0:1.82; Hole Diameter (do):4 mm; d:60 mm; da (min):72 mm; Da (max):118 mm; Dynamic Load Rating:390,000 N; Weight:3.050 kg; Center Guidance:Floating Steel Ring; |
| 7219CTRSUMP3 NSK Super Precision Bearings | Bore Type:Cylindrical Bore; r1:3 mm; db (min):144 mm; Fillet Radius/Chamfer:3 mm; Enclosure:Open; Static Load Rating:455,000 N; B:40 mm; ra (max):2.5 mm; Dynamic Load Rating:365,000 N; Da (max):216 mm; Radial Clearance:0.060 to 0.105 mm; Inside Ring Outside Diameter:153.5 mm; ra1 (max):2.5 mm; Limiting Speed - Grease:2,400 rpm; dd (min):168 mm; dc (min):158 mm; Limiting Speed - Oil:2,800 rpm; d:130 mm; |
| 7920CTRDUMP3 NSK Super Precision Bearings | Seal Type:High Temperature Pac; Dimension U:0.2 in; Ca - Axial Load Rating:719.38 lbf; Tensioning Unit Type:Push Type; Maximum Speed:5400 rpm; Series Type:Light Series; Dimension S:1.0 in; Dimension P:0.6 in; Note:This product line wa; Dimension N:6.8 in; Dimension H:1.1 in; Bearing UPC:013992025401; Bearing Number:LSE108BR; Shaft Size:1.5 in; Dimension D:6.0 in; Bearing - Housing - Seal:LSE108BRHHTPS; |
| 7917A5TRSUMP3 NSK Super Precision Bearings | Oil Lubrication - M/N Seal:1600 rpm; Dimension L Fix:3.78 in; Dimension D:6.650 in; Engineering Group:Mounted Bearing; Dimension K:1.25 in; UPC Code:0883450143769; Dimension S:3.62 in; Shaft Tolerance:0.0020 in; Eng Internal Radial Clearance - Max:0.0031; Locking Style:Eccentric; Dimension J (Bolt Size):0.75 in; Dimension BC:8.5 in; C - Dynamic Load (Basic):49900 lb; C0 - Static Load:54100 lb; Bearing Number:22215; |
| 7918CTRSUMP3 NSK Super Precision Bearings | H:271 mm; J:350.00 mm; C1 Dynamic Load Rating:647; L:410.00 mm; A:185.00 mm; Bearing:22224; End Cover1:EC524-620; Cage Type:EJ; Locating Rings (width x OD):SR215X14; Max Grease Speed:2600; N:18 mm; Material :Cast Iron; Bolt Qty:2; UPC Code:999999999; Shaft Diameter da:120 mm; C0 Static Load Rating:772; G:M16; Seal Type:Taconite; A1:120 mm; Housing:FSNT 524-620; |
| 7918CTRSULP3 NSK Super Precision Bearings | G1 - Heat Generation Factor (Roller-Raceway)11:35.2; T - Bearing Width across Cones:2.2500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:9180 lbf; Bearing Weight:2.85 lb; Cone Part Number:25581; C - Double Cup Width:1.8750 in; B - Cone Width:1.0000 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5270 lbf; db - Cone Backface Backing Diameter:2.01 in; Y1 - ISO Factor9:2.02; |
| 7915A5TRSUMP3 NSK Super Precision Bearings | Cg - Geometry Factor11:0.117; T - Bearing Width across Cones:3.1874 in; Design Units:Imperial; db - Cone Backface Backing Diameter:3.46 in; r - Cup Frontface To Clear Radius2:0.06 in; Aa - Cage-Cone Backface Clearance:0.1 in; Da - Cup Frontface Backing Diameter:4.80 in; Ab - Cage-Cone Frontface Clearance:0.11 in; Y2 - ISO Factor10:2.76; R - Cone Backface To Clear Radius1:0.14 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:7130 lbf; |
| 7020A5TRSULP3 NSK Super Precision Bearings | A1:110 mm; Housing Mass:17.6 Kg; Bolt Qty:4; Max Oil Speed:3500; Adapter Sleeve1:H2317; J:320.00 mm; Locating Rings (width x OD):SR180X5; J2:348 mm; N:18 mm; H1:112.0 mm; Cage Type:EJ; Seal:TA617; N1:24.00 mm; Seal Type:Taconite; C1 Dynamic Load Rating:569; Shaft Diameter d:75 mm; L:380.00 mm; Bearing:22317K; A3:235 mm; End Cover2:EC520-617; |
| 7018CTRSUMP3 NSK Super Precision Bearings | End Cover1:EC532; Bolt Qty:2; G:M30; Material :Cast Iron; Seal Type:V-ring; J:470 mm; Max Oil Speed:1400; Max Grease Speed:1200; Shaft Diameter da:160 mm; N:35 mm; UPC Code:999999999; H1:170.0 mm; L:550.00 mm; A1:160 mm; H:344 mm; Jmin:463 mm; C1 Dynamic Load Rating:1470; A:235.00 mm; Bearing:23232; Shaft Diameter db:175 mm; |
| No. | Brand | E | H | s | Q | L | b | e | t |
| 7215CTRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 75BNR10STV1VSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 75BNR10STSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 7015CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7916A5TRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 7217CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7022CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 70BNR10STSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 7920CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7021CTRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7217A5TRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7020CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7018CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7917A5TRDULP3 | NSK | - | - | - | - | - | - | 0.063 in | - |
| 7017A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 70BNR10HTYNDUELP3 | NSK | - | - | - | - | - | - | - | - |
| 7218CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7918CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7919CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7916A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 70BTR10STYNDBLP4A | NSK | - | - | - | - | - | - | - | - |
| 7919A5TRDULP3 | NSK | - | - | - | - | 205.00 mm | - | - | - |
| 7019A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7016A5TRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 7220A5TRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7021A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7920A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7220CTRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 70BNR19STV1VSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7019CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
7919A5TRDUMP3 NSK Super Precision Bearings Video
Super Precision Bearings | Products | NSK Global
Try out the new app! NSK has launched a free app primarily for precision bearings for machine tools. Scan 2D barcodes printed on NSK bearing boxes to assess
Timken Fafnir Super Precision Bearings For Machine Tool
Timken super precision ball bearings meet the highest industry standards in tolerance levels (including ABEC 9). Designed for machine tool applications, our
Super-precision bearings | SKF
With high running accuracy, high-speed performance and high system rigidity, SKF super-precision bearings are ideal for machine tools and other precision
Precision Bearings | The Timken Company
Miniature and Super Precision. The quality steel, tolerances and features of Timken® miniature bearings meet demanding performance requirements. Our super
Super Precision Bearings - the Schaeffler Group
FAG super precision bearings for main spindles stand for very high precision and absolute operational security. Innovative FAG spindle bearing solutions are
Super Precision Ball Bearings - NSK Americas
NSK Super Precision Bearings are designed to meet demanding needs of special applications including high accuracy, high rotational speed and high rigidity
Super Precision Bearings - Bearings | Nachi America
Super Precision Bearings. Nachi-Fujikoshi bearings business started out by using the superior materials made by the company and by applying expertise in
Super Precision Bearings | Emerson Bearing
Super precision bearings are available in several different types, with each offering unique features and