| 7922A5TRDUDMP3 NSK Super Precision Bearings | Roller Profile:Symmetric; Nr. of Holes:8; Limiting Speed - Oil:570 rpm; Hole Diameter (do):20 mm; Constant e:0.36; da (min):496 mm; Enclosure:Open; Static Load Rating:14,500,000 N; Weight:709.000 kg; Retainer Material:Machined Brass; Configuration:Double Row; Bore Type:Tapered Bore; Axial Load Factor Y2:2.75; Dynamic Load Rating:10,600,000 N; ra (max):6 mm; Axial Load Factor Y1:1.85; B:296 mm; Da (max):794 mm; |
| 7921CTRDULP3 NSK Super Precision Bearings | Da (max):104 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.025 to 0.051 mm; da (min):76 mm; d:70 mm; D:110 mm; ra (max):1 mm; Dynamic Load Rating:38,000 N; Weight:0.607 kg; Static Load Rating:31,000 N; Factor fo:15.6; Limiting Speed - Grease:6,100 rpm; B:20 mm; Enclosure:Double Seal; Configuration:Single Row; |
| 7019A5TRDULP3 NSK Super Precision Bearings | D:39.95 mm; Diameter S-3:292.10 mm; G:24.89 mm; Major Diameter:299.34 mm; H2:11.13 mm; Locknut:N 060; Bearing Bore:300 mm; Threads No. per Inch:6; R:254.0 mm; S3:34.9 mm; H14:12.954 mm; L1:42.85 mm; C1:360.50 mm; F:50.01 mm; Relief Diameter A:293.22 mm; Lockplate:P 60; |
| 7916A5TRDULP3 NSK Super Precision Bearings | Y1 - ISO Factor5:2.11; Y2 - ISO Factor6:3.14; G2 - Heat Generation Factor (Rib-Roller End):14; Y - ISO Factor1:1.88; Cg - Geometry Factor8:0.0773; r - Cup Frontface To Clear Radius2:0.03 in; C - Double Cup Width:1.6563 in; D:3.5433 in; Da - Cup Frontface Backing Diameter:3.34 in; e - ISO Factor4:0.32; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway)7:33.8; K - Factor3:1.83; Series:365; |
| 7922A5SN24TRDULP3 NSK Super Precision Bearings | Roller Profile:Symmetric; Constant e:0.24; Retainer Material:Pressed Steel; Limiting Speed - Oil:7,500 rpm; Enclosure:Open; Weight:0.650 kg; Limiting Speed - Grease:6,200 rpm; Bore Type:Tapered Bore; Configuration:Double Row; Axial Load Factor Y2:4.15; Axial Load Factor Y1:2.79; Hole Diameter (do):3 mm; da (min):57 mm; Groove Width A:6 mm; Static Load Rating:122,000 N; Axial Load Factor Y0:2.73; B:23 mm; |
| 7219CTRSULP3 NSK Super Precision Bearings | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:275000 lbf; Cone Part Number:LM451349A; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):1554.1; Ab - Cage-Cone Frontface Clearance:0.18 in; B - Cone Width:2.2500 in; K - Factor8:1.62; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:25200 lbf; db - Cone Backface Backing Diameter:11.77 in; Cage Type:Stamped Steel; |
| 70BER10STV1VSULP3 NSK Super Precision Bearings | Enclosure:Open; Groove Diameter:30.7 mm; a (max):1.3 mm; Groove Width:1 mm; Radial Clearance:0.013 to 0.028 mm; Limiting Speed - Oil:26,000 rpm; Factor fo:15.5; da (min):22 mm; Dynamic Load Rating:4,000 N; Bore Type:Cylindrical Bore; Limiting Speed - Grease:22,000 rpm; Da (max):30 mm; Static Load Rating:2,640 N; r1:0.3 mm; d:20 mm; ra (max):0.3 mm; B:7 mm; Weight:0.020 kg; Cy (max):1.8 mm; Fillet Radius/Chamfer:0.3 mm; |
| 7019CTRDUDMP3 NSK Super Precision Bearings | Features:O.D. Groove; C0r - Static Load Rating:18.1 kN; Radius Rs min:1.100 mm; Bore Size d:40 mm; Outside Ring Width B:18.000 mm; Oil Reference Speed:13000 rpm; Outside Diameter D:80.000 mm; Weight:0.37 Kg; Clearance:C3; Cr - Dynamic Load Rating:29.5 kN; Grease Reference Speed:8800 rpm; |
| 7918CTRSUMP3 NSK Super Precision Bearings | H:271 mm; J:350.00 mm; C1 Dynamic Load Rating:647; L:410.00 mm; A:185.00 mm; Bearing:22224; End Cover1:EC524-620; Cage Type:EJ; Locating Rings (width x OD):SR215X14; Max Grease Speed:2600; N:18 mm; Material :Cast Iron; Bolt Qty:2; UPC Code:999999999; Shaft Diameter da:120 mm; C0 Static Load Rating:772; G:M16; Seal Type:Taconite; A1:120 mm; Housing:FSNT 524-620; |
| 7021CTRDUMP3 NSK Super Precision Bearings | Configuration:Double Row; Dynamic Load Rating:90,000 N; Enclosure:Open; Limiting Speed - Grease:3,200 rpm; Static Load Rating:80,500 N; Weight:1.910 kg; ra:1.5 mm; D:130 mm; Dx:141.5 mm; Fillet Radius/Chamfer:1.5 mm; da:84 mm121 mm; Cy:6.5 mm; Limiting Speed - Oil:4,300 rpm; Bore Type:Cylindrical Bore; d:75 mm; B:41.3 mm; Radial Clearance:0.025 to 0.051 mm; |
| 7215CTRSUMP3 NSK Super Precision Bearings | Oil Lubrication - M/N Seal:2700 rpm; e - Geometry Factor:0.27; Locking Style:Eccentric; Weight:10 lb; Grease Lubrication - B/C/O Seal:1950 rpm; Dimension S:2.75 in; Dimension N:2.260 in; Dimension K:1 in; Dimension D:4.25 in; Dimension C:2.380 in; Grease Lubrication - T Seal:4000 rpm; Shaft Size Type:Imperial; Dimension R:0.13 in; Dimension BC:5.00 in; Full Timken Part Number:QMFY08J107SB; Dimension L Exp:2.96 in; |
| 70BNR19STSULP3 NSK Super Precision Bearings | Cor - Static Load Rating:626992 lbf; Ca - Axial Load Rating:29405 lbf; Dimension V:0.3 in; Shaft Size:9.5 in; Dimension H:7.1 in; Bearing Type:Split Cylindrical Re; Note:This product line wa; Maximum Speed:700 rpm; Dimension L:13.0 in; Dimension P:1.9 in; Dimension T:35.0 in; Support Type:Round Flange; Cr - Dynamic Load Rating:426238 lbf; Dimension N:27.252 in; Series Type:Heavy Series; Bearing UPC:013992023506; |
| 7916A5TRSULP3 NSK Super Precision Bearings | Bearing Type:Split Cylindrical Ex; Note:This product line wa; Maximum Speed:1030 rpm; Bolt Size:4 x M30; Dimension M:10.0 in; Housing Width:10.0 in; Dimension J:25.0 in; Dimension H2:22.8 in; Shipping Weight:1127 lb; Series Type:Heavy Series; Dimension L:30.0 in; Dimension H:10.984 in; Bearing - Housing - Seal:HSM175BXHHTPS; Seal Type:High Temperature Pac; Shaft Size:175 mm; Cr - Dynamic Load Rating:298996 lbf; |
| 7916A5TRDUDMP3 NSK Super Precision Bearings | Bolt Hole Width N:18.3 mm; Inside Ring Outside Diameter:0.720 in; Dimension B1:2.469 in; Static Load Rating:5210 lbf; Dynamic Load Rating:8740 lbf; Bearing Type:Ball Bearing; Foot Height H1:19.1 mm; Shaft Size d:1 7/8 in; Base to Center Height H:57.15 mm; Center of Bearing from End S:24.6 mm; Dimension L1:66.7 mm; Total Width A:2.280 in; Series:Industrial; Bearing Number:G1114KPPB3; Bolt Hole Length N1:25.40 mm; |
| No. | Brand | E | H | s | Q | L | b | e | t |
| 7917A5TRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7021A5TRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 7219A5TRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7921A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7920CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7016CTRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 7022A5TRQUMP3 | NSK | - | - | - | - | - | - | - | - |
| 70BNR19STV1VSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7217A5TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7221A5TRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 75BNR10STSULP3 | NSK | - | - | - | - | - | - | 4 mm | 9 mm |
| 7220CTRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 7916CTRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 7222A5TRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 75BER10XTV1VSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 7222CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7917CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7915CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7017CTRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7017CSN24TRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7915CTRSUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7220A5TRDUDMP3 | NSK | - | - | - | - | - | - | - | - |
| 7215CTRDUDLP3 | NSK | - | - | 28 mm | - | - | - | - | - |
| 7021A5TRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7917A5TRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7020A5TRSUMP3 | NSK | - | - | - | - | - | - | - | - |
7215CTRDULP3 NSK Super Precision Bearings Video
Super Precision Bearings - the Schaeffler Group
FAG super precision bearings for main spindles stand for very high precision and absolute operational security. Innovative FAG spindle bearing solutions are
Precision Bearings | The Timken Company
Miniature and Super Precision. The quality steel, tolerances and features of Timken® miniature bearings meet demanding performance requirements. Our super
Super Precision Bearings - Bearings | Nachi America
Super Precision Bearings. Nachi-Fujikoshi bearings business started out by using the superior materials made by the company and by applying expertise in
Super Precision Ball Bearings - NSK Americas
NSK Super Precision Bearings are designed to meet demanding needs of special applications including high accuracy, high rotational speed and high rigidity
Timken Fafnir Super Precision Bearings For Machine Tool
Timken super precision ball bearings meet the highest industry standards in tolerance levels (including ABEC 9). Designed for machine tool applications, our
Super-precision bearings | SKF
With high running accuracy, high-speed performance and high system rigidity, SKF super-precision bearings are ideal for machine tools and other precision
Super Precision Bearings | Emerson Bearing
Super precision bearings are available in several different types, with each offering unique features and
Super Precision Bearings | Products | NSK Global
Try out the new app! NSK has launched a free app primarily for precision bearings for machine tools. Scan 2D barcodes printed on NSK bearing boxes to assess