62.20.0630.000.11.1503 Standard 5 Slewing Ring Bearings | Static Load Rating:10100 lbf; Bolt Hole Length N1:31.8 mm; Seal Type:Shroud Seal; Center of Bearing from End S:37.3 mm; Base to Center Height H:95.25 mm; Inside Ring Outside Diameter:0.937 in; Bearing Type:Ball Bearing; Bolt Hole Spacing J:206.4 mm; Foot Height H1:38.1 mm; Dimension B1:3.626 in; Total Height H2:177.80 mm; Dynamic Load Rating:15500 lbf; Inside Ring Width B:=Bearings1_Inside Ri; Shaft Size d:2 15/16 in; |
232.21.0575.013 Type 21/650.2 Standard 5 Slewing Ring Bearings | G:0.360 in; E:4.281 in; Threads No. per Inch:12; Weight:1.30 lb; D:0.698 in; H:0.166 in; Major Diameter d:3.527 in; C:4.661 in; |
232.20.0800.503 Type 21/950.2 Standard 5 Slewing Ring Bearings | Cage Type:Brass; D:130mm; Grease Limiting Speed (r/min):2900; Static Load Rating (kN):75.4; Clearance:Standard; Dynamic Load Rating (kN):107; d:50mm; Seals or Shields:Open Type; Weight:2.10 KGS; SKU:7410bmg-nsk; B:31mm; Availability:In Stock; Oil Limiting Speed (r/min):5800; |
162.25.0980.890.11.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:203000 N; B:49.00 mm; D:225.0000 mm; Basic Static Radial Load Rating Co:196000 N; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; d:105.000 mm; Oil Speed Rating n2:3400 rpm; Grease Speed Rating n1:2400 rpm; |
231.20.0800.503 Type 21/950.1 Standard 5 Slewing Ring Bearings | Series:HM218200; D:6.0000 in; Design Units:Imperial; Y - ISO Factor3:1.8; C - Cup Width:1.2795 in; Cup Part Number:HM218215; r - Cup Backface To Clear Radius1:0.130 in; Cg - Geometry Factor:0.0921; Db - Cup Backface Backing Diameter:5.31 in; e - ISO Factor2:0.33; Da - Cup Frontface Backing Diameter:5.64 in; |
60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | da - Cone Frontface Backing Diameter:37.59 mm; Bearing Weight:0.6 Kg; Cg - Geometry Factor:0.063; Y - ISO Factor9:1.67; B - Cone Width:18.923 mm; Ab - Cage-Cone Frontface Clearance:2.3 mm; Series:26000; db - Cone Backface Backing Diameter:39.62 mm; D:85.001 mm; G2 - Heat Generation Factor (Rib-Roller End):10.1; B:18.999 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:13200 lbf; G1 - Heat Generation Factor (Roller-Raceway):16.1; |
60.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Bearing Number:MSE704BR; Bolt Size:4 x 1-1/2; Seal Type:High Temperature Pac; Note:This product line wa; Dimension H :9-1/2 in; Housing Width:9.3 in; Series Type:Medium Series; Dimension K :5-1/4 in; Dimension J2 :25-1/8 in; Bearing UPC:013992105387; Dimension J1 :27-13/16 in; Dimension M :8-3/4 in; Dimension H2:21.35 in; Dimension L :32-3/4 in; Bearing Type:Split Cylindrical Re; |
60.20.0744.575.01.1403 Standard 5 Slewing Ring Bearings | C0r - Static Load Rating:11.5 kN; Outside Diameter D:68.000 mm; Bore Size d:40 mm; Clearance:C3; Radius Rs min:1.000 mm; Weight:0.19 Kg; Oil Reference Speed:15000 rpm; Grease Reference Speed:10000 rpm; Features:O.D. Groove; Outside Ring Width B:15.000 mm; Cr - Dynamic Load Rating:16.8 kN; |
230.21.0675.013 Type 21/750. Standard 5 Slewing Ring Bearings | Limiting Speed Rating (r/min):5600; Clearance:Standard; Weight:0.02 KGS; D:160mm; Fatigue Load Rating (kN):34.5; B:37mm; Static Load Rating (kN):325; Reference Speed Rating (r/min):4000; Seals or Shields:Open Type; Cage Type:Steel; SKU:21315e-skf; Dynamic Load Rating (kN):285; Availability:In Stock; d:75mm; |
230.21.1075.013 Type 21/1200. Standard 5 Slewing Ring Bearings | Taper:1:12; S:1.156 in; Lockwasher and Lockplates:W-032; B2:6.512 in; SNW/SNP Assembly Weight:12 lb; Bearing Number:23032K; Tolerance1:-0.005 in; Series:230K; Diameter d :5 7/16 in; D1:7.505 in; Locknut:N-032; Sleeve:S-3032; |
282.30.1000.013 Type 110/1200.2 Standard 5 Slewing Ring Bearings | Weight:0.02 KGS; B:31mm; Availability:In Stock; Cage Type:Steel; d:60mm; SKU:6312/c3-qbl; Seals or Shields:Open Type; D:130mm; Clearance:C3; |
62.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Limiting Speed (Oil):26200 rpm; Bearing Weight:0.340 Kg; da - Inner Ring Backing Diameter:76.300 mm; d:70 mm; Contact Angle:15 ยบ; Ball Type:STEEL; Bearing Width:16 mm; do - Ball Diameter:8.73125 mm; Design Units:METRIC; D:100 mm; Cage Type:CR - Phenolic Outer; Da - Outer Ring Backing Diameter:94.300 mm; C0 - Static Radial Rating:29000 N; Limiting Speed (Grease):13100 rpm; R - Inner Ring To Clear Radius2:1.0 mm; |
161.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Da - Cup Frontface Backing Diameter:13.93 in; Y - ISO Factor1:1.6; K - Factor3:1.56; Design Units:Imperial; Y1 - ISO Factor5:1.8; G1 - Heat Generation Factor (Roller-Raceway)7:1330; Y2 - ISO Factor6:2.69; e - ISO Factor4:0.37; Series:134000; D:14.3750 in; C - Double Cup Width:3.8750 in; Cg - Geometry Factor8:0.147; G2 - Heat Generation Factor (Rib-Roller End):187; r - Cup Frontface To Clear Radius2:0.06 in; |
161.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | G2 - Heat Generation Factor (Rib-Roller End):21.5; Cg - Geometry Factor11:0.0789; da - Cone Frontface Backing Diameter:2.2 in; Y - ISO Factor9:1.48; a - Effective Center Location3:-0.03 in; e - ISO Factor8:0.41; Bearing Weight:2 lb; B - Cone Width:0.6875 in; Cup Part Number:18720-B; T1 - Bearing Width:0.6875 in; Ab - Cage-Cone Frontface Clearance:0.09 in; Series:18700; db - Cone Backface Backing Diameter:2.44 in; |
No. | Brand | t | S | J | A | F | D | R | i |
232.20.0900.503 Type 21/1050.2 | Standard 5 | - | - | - | - | - | 230mm | - | - |
162.25.1077.891.21.1503 | Standard 5 | - | - | - | - | - | 460.0000 mm | - | - |
61.25.0955.500.11.1503 | Standard 5 | - | 2.859 in | - | - | - | - | - | - |
230.20.0400.013 Type 21/520. | Standard 5 | - | - | - | - | - | 17.6250 in | - | - |
60.35.0680.000.11.1503 | Standard 5 | - | - | - | - | - | 110.0000 mm | - | - |
280.30.1075.013 Type 110/1200. | Standard 5 | - | - | - | - | - | - | - | - |
281.30.1075.013 Type 110/1200.1 | Standard 5 | - | - | - | - | - | 4.8750 in | - | - |
162.20.0710.890.11.1503 | Standard 5 | - | - | - | - | - | 90mm | - | - |
61.20.0560.100.11.1503 | Standard 5 | - | - | - | - | - | 8mm | - | - |
280.30.0975.013 Type 110/1100. | Standard 5 | - | - | - | - | - | 11.1250 in | - | - |
61.25.1155.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
61.25.1055.500.11.1503 | Standard 5 | 9 mm | - | - | - | - | - | - | - |
280.30.0900.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
281.30.1175.013 Type 110/1300.1 | Standard 5 | - | - | - | - | - | 4.3307 in | - | - |
62.20.0450.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
60.20.0544.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.20.0630.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
232.20.0500.503 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | - |
60.25.0475.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
62.30.1250.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
62.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | 520mm | - | - |
11.25.1200.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.25.0855.500.11.1503 | Standard 5 | - | - | - | - | - | 125mm | - | - |
232.21.0775.013 Type 21/850.2 | Standard 5 | - | - | - | - | - | 120.0000 mm | - | - |
91.20.1006.991.21.1503 | Standard 5 | - | - | - | - | - | 500mm | - | - |
62.25.1077.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
250.15.0400.013 Type 13/5 | Standard 5 | - | - | - | - | - | 160.0000 mm | - | - |
231.21.1075.013 Type 21/1200.1 Standard 5 Slewing Ring Bearings Video